One track. Every colour. Nothing to take down.
Here is exactly what gets installed on your home, how it is controlled, and what the two weeks between your first call and your first switch-on actually look like.
What actually goes on your house.
Four parts, and only one of them is visible from the street — barely.
A slim extruded aluminium channel, powder-coated to match your fascia in white, black, brown or bronze. It mounts tight under the soffit or along the roof edge and carries the whole run, so nothing is clipped, stapled or taped to your house.
Individually addressable RGB and warm-white diodes, seated inside the channel and facing down. You see the light they cast, not the bulb itself. Rated for 50,000 hours — about twenty years of normal evening use.
A weather-rated controller tucked somewhere discreet — usually beside the garage or the electrical panel. It joins your home Wi-Fi and is what your phone talks to, whether you are in the driveway or three time zones away.
Low-voltage, energy-efficient and plugged into a standard exterior outlet. Running the whole roofline costs pennies a night, and scheduling means it only runs when you want it to.
The whole fixture. Mounted, sealed and colour-matched — photographed in the rain.
This is what the neighbours see at noon.
A clean trim line. That is the entire visual footprint of a full permanent lighting system.
From first call to first switch-on.
Free consultation
We come to you, walk the property, measure every roofline and accent run, and talk through what you want the house to feel like after dark. No charge and no pressure.
Custom design & fixed quote
You get a layout drawn for your home's actual peaks, gables and accents, the track colour matched to your trim, and a written price that does not move afterwards.
Professional installation
Our own trained technicians handle every ladder and every connection. Most single-family homes are finished in a single day, and we clean up behind ourselves.
Setup, training & warranty
We join the controller to your Wi-Fi, build your first scenes alongside you, and hand over a 10-year parts-and-labour warranty before we leave.
Total control. Zero complexity.
Everything below happens from your phone, from anywhere with a signal.
- Zones — split the house into sections and colour each independently
- Individual bulbs — address a single light for patterns, chases and gradients
- Schedules — dusk-to-dawn, or a holiday that sets itself while you are away
- Brightness — full brilliance for a party, a whisper for a quiet evening
- Animations — fades, twinkles, sweeps and motion effects
- 1,000+ presets — start from one, tweak it, save it, share it with neighbours
The numbers that matter
Still wondering?
We would rather answer it now than after you have booked.
No. The channel is fastened into the fascia or soffit with appropriate hardware and sealed — the same approach used for gutters. It is a far gentler treatment than the clips and staples that go up and come down every December.
Individual diodes are serviceable, and the whole system is covered for ten years on parts and labour. Call us and we will come out — you never go up the ladder.
In most cases no — the system is low-voltage and runs from a standard exterior outlet. If your home does not have one where it is needed, we will flag that at the quote stage rather than surprising you on install day.
The system stays with the house, and buyers tend to see it as a feature. Hand over the app login and the new owners are running it the same evening.
Yes. Path lights, tree uplights and patio zones can be added to the same controller and appear in the same app alongside your roofline.
Bright enough to light the whole facade at full output, and dimmable right down to a soft accent. Most homeowners run around half brightness on an ordinary evening and save the full effect for occasions.
See it drawn on your own roofline.
Book the free consultation. We measure, sketch the layout on your actual home and leave you with a fixed price — owing nothing if you walk away.